Consumer Water Heaters

As defined in the Code of Federal Regulations (CFR), “consumer water heater” means a product which utilizes oil, gas, or electricity to heat potable water for use outside the heater upon demand, including — (1) Storage type units which heat and store water at a thermostatically controlled temperature, including gas storage water heaters with an input of 75,000 Btu per hour or less, oil storage water heaters with an input of 105,000 Btu per hour or less, and electric storage water heaters with an input of 12 kilowatts or less; (2) Instantaneous type units that heat water but contain no more than one gallon of water per 4,000 Btu per hour of input, including gas instantaneous water heaters with an input of 200,000 Btu per hour or less, oil instantaneous water heaters with an input of 210,000 Btu per hour or less, and electric instantaneous water heaters with an input of 12 kilowatts or less; and (3) Heat pump type units, with a maximum current rating of 24 amperes at a voltage no greater than 250 volts, which are products designed to transfer thermal energy from one temperature level to a higher temperature level for the purpose of heating water, including all ancillary equipment such as fans, storage tanks, pumps, or controls necessary for the device to perform its function. 10 CFR 430.2(link is external) Manufacturers have been required to comply with the U.S. Department of Energy (DOE) energy conservation standards for consumer water heaters since 1990.